1/2 x 3 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS)
SKU
20A-1F12
Special Price $ 1.78 Regular Price $ 2.64
- Buy 150 for $ 1.03 each and save 42%
1/2 x 3 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS) is available to buy in increments of 25
1/2" x 3" long sleeve anchor with a 3/8" hex nut head from Steel Zinc CR+3 (RoHS). This Hex Nut Masonry Expansion Sleeve Anchor has a minimum 1-1/2" embed depth with ultimate holding values of 3008 lb. pullout, and 5344 lb. shear in 4000 psi concrete.
1/2 x 3 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS)
The 1/2 x 3 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS) is suitable for medium to heavy duty anchoring in all masonry and concrete. They are supplied pre-assembled for ready installation without special tools. The drilled hole and anchor are the same 1/2" diameter for easy attachement. Sleeve expands over full length of bolt.
Product Attributes
- SKU20A-1F12
- Diameter1/2"
- Effective Anchor Length1/2-16 x 3"
- MaterialSteel
- Surface TreatmentZinc CR+3 (RoHS)
- Min. Embed Depth1-1/2"
- Bolt Diameter3/8"
- 4000 PSI Pull Out3008 lbs.
- 4000 PSI Shear5344 lbs.
- Min. Anchor Spacing10 Hole Diameters
- Min. Edge Distance5 Hole Diameters
| Material Grade | Steel Zinc CR+3 (RoHS) |
|---|
