1/2 x 4 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS)

SKU
20A-1F13
Special Price $ 2.18 Regular Price $ 3.21
  • Buy 125 for $ 1.26 each and save 42%
1/2 x 4 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS) is available to buy in increments of 25

InSpec Logo

1/2" x 4" long sleeve anchor with a 3/8" hex nut head from Steel Zinc CR+3 (RoHS). This Hex Nut Masonry Expansion Sleeve Anchor has a minimum 1-1/2" embed depth with ultimate holding values of 5625 lb. pullout, and 7092 lb. shear in 4000 psi concrete.

Attributes

1/2 x 4 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS)


The 1/2 x 4 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS) is suitable for medium to heavy duty anchoring in all masonry and concrete. They are supplied pre-assembled for ready installation without special tools. The drilled hole and anchor are the same 1/2" diameter for easy attachement. Sleeve expands over full length of bolt.

Product Attributes

  • SKU20A-1F13
  • Diameter1/2"
  • Effective Anchor Length1/2-16 x 4"
  • MaterialSteel
  • Surface TreatmentZinc CR+3 (RoHS)
  • Min. Embed Depth1-1/2"
  • Bolt Diameter3/8"
  • 4000 PSI Pull Out5625 lbs.
  • 4000 PSI Shear7092 lbs.
  • Min. Anchor Spacing10 Hole Diameters
  • Min. Edge Distance5 Hole Diameters
More Information
Material GradeSteel Zinc CR+3 (RoHS)