1/4 x 1-3/8 InSpec® Sleeve Anchor Flat Head Phillips/Slotted Combo Steel Zinc CR+3 (RoHS)
SKU
20A-1H04C
Special Price .80¢ Regular Price $ 1.18
1/4 x 1-3/8 InSpec® Sleeve Anchor Flat Head Phillips/Slotted Combo Steel Zinc CR+3 (RoHS) is available to buy in increments of 100
1/4" x 1-3/8" long flat head sleeve anchor with a phillips/slotted combo drive from Steel Zinc CR+3 (RoHS). This Flat Head Phillips/Slotted Combo Masonry Expansion Sleeve Anchor has a minimum 1" embed depth with ultimate holding values of 1364 lb. pullout, and 952 lb. shear in 4000 psi concrete.
1/4 x 1-3/8 InSpec® Sleeve Anchor Flat Head Phillips/Slotted Combo Steel Zinc CR+3 (RoHS)
The 1/4 x 1-3/8 InSpec® Sleeve Anchor Flat Head Phillips/Slotted Combo Steel Zinc CR+3 (RoHS) is suitable for medium to heavy duty anchoring in all masonry and concrete. They are supplied pre-assembled for ready installation without special tools. The drilled hole and anchor are the same 1/4" diameter for easy attachement. Sleeve expands over full length of bolt.
Product Attributes
- SKU20A-1H04C
- Diameter1/4"
- Effective Anchor Length1/4-24 x 1 3/8"
- MaterialSteel
- Surface TreatmentZinc CR+3 (RoHS)
- Min. Embed Depth1"
- Bolt Diameter3/16"
- 4000 PSI Pull Out1364 lbs.
- 4000 PSI Shear952 lbs.
- Min. Anchor Spacing10 Hole Diameters
- Min. Edge Distance5 Hole Diameters
| Material Grade | Steel Zinc CR+3 (RoHS) |
|---|
