10-32 UNF x 7.5mm SwiftSert Threaded Insert For Metals - Carbon Steel 12L14 - Made in USA
The 10-32 UNF x 7.5mm SwiftSert Threaded Insert For Metals - Carbon Steel 12L14 is a standard wall insert designed for soft metals The insert has a preapplied adhesive on the external threads which activates upon installation. This American Made free-running insert has a 10-32 UNF Right-Hand internal thread and is 0.295 long. The inserts external thread is M8 x 1.25 Right-Hand ISO.
10-32 UNF x 7.5mm SwiftSert Threaded Insert For Metals - Carbon Steel 12L14
SwiftSert inserts are ideal for repairing or reinforcing threaded holes in aluminum, magnesium, cast iron, and other soft metal materials. Manufactured from Carbon Steel 12L14, these Standard wall inserts feature specialized thread locking adhesive on external threads for extra-secure installation. The Loctite seals against liquids and gases to pressures of 6,000 psi. This American Made free-running insert has a 10-32 UNF Right-Hand internal thread and is 0.295 long. The inserts external thread is M8 x 1.25 Right-Hand ISO. Order today from Industrial Hardware and Specialties.
Features
- Easy to install: solid threaded inserts install with standard tools, simply drill, tap and thread like any ordinary fastener (no special taps or installation tools are necessary)
- Strength: carbon steel solid threaded inserts are screw machined out of solid steel for a stronger overall product
- Standard OD Threads: solid threaded inserts for metal permit the use of standard drills and taps
- Self-Locking: pre-applied adhesive activates upon installation
- Vibration Resistant: adhesive secures the carbon steel solid threaded insert into place so it won't back out
- Seals against Liquids/Gases: solid threaded inserts are pressurized up to 6,000 psi.
Applications:
- Soft metals: aluminum, cast iron, magnesium, etc.
Installation:
Unlike helical inserts, which require a special tap and installation tool, SwiftSert threaded inserts for metal are installed using standard tools, and installation is as easy as 1-2-3.- Simply drill the correct sized hole with a standard drill
- Tap your hole with a standard tap
- Turn in the SwiftSert insert like an ordinary fastener with a screwdriver, bolt and jam nut, or a drive tool.
SwiftSert threaded inserts are self-locking and open immediately upon installation. The pre-applied adhesive on the external threads sets immediately allowing for the newly installed insert to be fastener ready.
SwiftSert solid wall threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or drive tool. When using a bolt and jam nuts for installation, the slotted end of the insert can be either up or down.
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering.
| Application | Metals |
|---|---|
| Material | Carbon Steel 12L14 |
| Insert Style | Free-Running |
| Drive | Slotted |
| ID Thread Rotation | Right-Hand |
| ID Thread Standard | ANSI/ASME |
| ID Acronym | UNF |
| OD Thread Rotation | Right-Hand |
| OD Thread Standard | ISO Metric |
| OD Acronym | ISO |
| Flange/Flush | Flush |
| Wall Thickness | Standard |
| Inside Thread | 10-32 |
| Length | 7.5mm |
| Drill Size | 0.2720 (Letter I) |
| Drill Size | 0.2720 (Letter I) |
| Plug Tap Size | M8 x 1.25 |
| Decimal Outside Diameter | 0.3150 (M8 x 1.25) |
| Chrislynn Part Number | 9550-1032 |
-
Letter I (0.2720) High Speed Steel Straight Shank Drill BitSpecial Price $ 4.72 Regular Price $ 6.49
