3/8 x 1-7/8 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS)
SKU
20A-1F07
Special Price .88¢ Regular Price $ 1.29
- Buy 400 for .51¢ each and save 42%
3/8 x 1-7/8 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS) is available to buy in increments of 50
3/8" x 1-7/8" long sleeve anchor with a 5/16" hex nut head from Steel Zinc CR+3 (RoHS). This Hex Nut Masonry Expansion Sleeve Anchor has a minimum 1-1/4" embed depth with ultimate holding values of 2314 lb. pullout, and 3793 lb. shear in 4000 psi concrete.
3/8 x 1-7/8 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS)
The 3/8 x 1-7/8 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS) is suitable for medium to heavy duty anchoring in all masonry and concrete. They are supplied pre-assembled for ready installation without special tools. The drilled hole and anchor are the same 3/8" diameter for easy attachement. Sleeve expands over full length of bolt.
Product Attributes
- SKU20A-1F07
- Diameter3/8"
- Effective Anchor Length3/8-18 x 1 7/8"
- MaterialSteel
- Surface TreatmentZinc CR+3 (RoHS)
- Min. Embed Depth1-1/4"
- Bolt Diameter5/16"
- 4000 PSI Pull Out2314 lbs.
- 4000 PSI Shear3793 lbs.
- Min. Anchor Spacing10 Hole Diameters
- Min. Edge Distance5 Hole Diameters
| Material Grade | Steel Zinc CR+3 (RoHS) |
|---|
