3/8 x 3 InSpec® Sleeve Anchor Flat Head Phillips/Slotted Combo Steel Zinc CR+3 (RoHS)

SKU
20A-1H15C
Special Price $ 1.95 Regular Price $ 2.88
3/8 x 3 InSpec® Sleeve Anchor Flat Head Phillips/Slotted Combo Steel Zinc CR+3 (RoHS) is available to buy in increments of 50

InSpec Logo

3/8" x 3" long flat head sleeve anchor with a phillips/slotted combo drive from Steel Zinc CR+3 (RoHS). This Flat Head Phillips/Slotted Combo Masonry Expansion Sleeve Anchor has a minimum 1-1/4" embed depth with ultimate holding values of 2314 lb. pullout, and 3793 lb. shear in 4000 psi concrete.

Attributes

3/8 x 3 InSpec® Sleeve Anchor Flat Head Phillips/Slotted Combo Steel Zinc CR+3 (RoHS)


The 3/8 x 3 InSpec® Sleeve Anchor Flat Head Phillips/Slotted Combo Steel Zinc CR+3 (RoHS) is suitable for medium to heavy duty anchoring in all masonry and concrete. They are supplied pre-assembled for ready installation without special tools. The drilled hole and anchor are the same 3/8" diameter for easy attachement. Sleeve expands over full length of bolt.

Product Attributes

  • SKU20A-1H15C
  • Diameter3/8"
  • Effective Anchor Length3/8-18 x 3"
  • MaterialSteel
  • Surface TreatmentZinc CR+3 (RoHS)
  • Min. Embed Depth1-1/4"
  • Bolt Diameter5/16"
  • 4000 PSI Pull Out2314 lbs.
  • 4000 PSI Shear3793 lbs.
  • Min. Anchor Spacing10 Hole Diameters
  • Min. Edge Distance5 Hole Diameters
More Information
Material GradeSteel Zinc CR+3 (RoHS)