5/16 x 2-1/2 InSpec® Sleeve Anchor Flat Head Phillips/Slotted Combo Steel Zinc CR+3 (RoHS)
SKU
20A-1H11C
Special Price $ 1.56 Regular Price $ 2.30
- Buy 300 for .87¢ each and save 44%
5/16 x 2-1/2 InSpec® Sleeve Anchor Flat Head Phillips/Slotted Combo Steel Zinc CR+3 (RoHS) is available to buy in increments of 100
5/16" x 2-1/2" long flat head sleeve anchor with a phillips/slotted combo drive from Steel Zinc CR+3 (RoHS). This Flat Head Phillips/Slotted Combo Masonry Expansion Sleeve Anchor has a minimum 1" embed depth with ultimate holding values of 2522 lb. pullout, and 1675 lb. shear in 4000 psi concrete.
5/16 x 2-1/2 InSpec® Sleeve Anchor Flat Head Phillips/Slotted Combo Steel Zinc CR+3 (RoHS)
The 5/16 x 2-1/2 InSpec® Sleeve Anchor Flat Head Phillips/Slotted Combo Steel Zinc CR+3 (RoHS) is suitable for medium to heavy duty anchoring in all masonry and concrete. They are supplied pre-assembled for ready installation without special tools. The drilled hole and anchor are the same 5/16" diameter for easy attachement. Sleeve expands over full length of bolt.
Product Attributes
- SKU20A-1H11C
- Diameter5/16"
- Effective Anchor Length5/16-20 x 2 1/2"
- MaterialSteel
- Surface TreatmentZinc CR+3 (RoHS)
- Min. Embed Depth1"
- Bolt Diameter1/4"
- 4000 PSI Pull Out2522 lbs.
- 4000 PSI Shear1675 lbs.
- Min. Anchor Spacing10 Hole Diameters
- Min. Edge Distance5 Hole Diameters
| Material Grade | Steel Zinc CR+3 (RoHS) |
|---|
