5/8 x 6 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS)
SKU
20A-1F19
Special Price $ 6.58 Regular Price $ 9.72
- Buy 60 for $ 3.80 each and save 42%
5/8 x 6 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS) is available to buy in increments of 10
5/8" x 6" long sleeve anchor with a 1/2" hex nut head from Steel Zinc CR+3 (RoHS). This Hex Nut Masonry Expansion Sleeve Anchor has a minimum 3-1/2" embed depth with ultimate holding values of 8392 lb. pullout, and 10955 lb. shear in 4000 psi concrete.
5/8 x 6 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS)
The 5/8 x 6 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS) is suitable for medium to heavy duty anchoring in all masonry and concrete. They are supplied pre-assembled for ready installation without special tools. The drilled hole and anchor are the same 5/8" diameter for easy attachement. Sleeve expands over full length of bolt.
Product Attributes
- SKU20A-1F19
- Diameter5/8"
- Effective Anchor Length5/8-13 x 6"
- MaterialSteel
- Surface TreatmentZinc CR+3 (RoHS)
- Min. Embed Depth3-1/2"
- Bolt Diameter1/2"
- 4000 PSI Pull Out8392 lbs.
- 4000 PSI Shear10955 lbs.
- Min. Anchor Spacing10 Hole Diameters
- Min. Edge Distance5 Hole Diameters
| Material Grade | Steel Zinc CR+3 (RoHS) |
|---|
