Industrial Hardware and Specialties is classified as an ESSENTIAL business and is fully operational.

Please read our COVID-19 Message to our valued customers.

Campbell #6423105 Short Leg Structural GX Clamp - 1/16 to 3/4 in. Grip Range - 1 Metric Ton WLL

SKU
59A-6423105
Special Price $ 883.57 Regular Price $ 1316.19

Campbell Chain logo

The Campbell #6423105 Short Leg Structural GX Clamp - 1/16 to 3/4 in. Grip Range - 1 Metric Ton WLL from Industrial Hardware and Specialties is a spring loaded plate clamp that can be used for vertical or horizontal lifts. The Campbell UPC number 020418177347 has a safe working load of a 1 metric ton, and a 1/16" to 3/4" grip range. Made in the USA

Attributes

The Campbell #6423105 Short Leg Structural GX Clamp - 1/16 to 3/4 in. Grip Range - 1 Metric Ton WLL is a versatile American Made clamp used mostly for steel warehousing and benchwork. The clamp has a Working Load Limit of 1 metric ton and a grip range of 1/16" to 3/4". The Campbell 6423105 must have the short leg under the plate when lifting the plate from horizontal to vertical position.Designed for a secure bite on small or odd shaped, wide flanged beams. The Short Leg Structural GX Clamp always stay in contact with the work face of the load, even when the load is turning through 180 degrees. An exclusive feature of Campbell GX Model Clamps is their wear indicator system. If the cam's teeth are damaged or dulled between the unique wear indicator grooves, it's time to replace the cam. Campbell recommends replacing the pads every time you replace the cam. You can purchase the Campbell #6423105 at Industrial Hardware and Specialties today.

Campbell #6423105 Short Leg Structural GX Clamp - 1/16 to 3/4 in. Grip Range - 1 Metric Ton WLL


  • Designed for a Secure Bite on Small or Odd Shaped, Wide Flanged Beams
  • Can Be Used for Both Vertical and Horizontal to Vertical Lifting Through 180°
  • Put Short Leg Under Plate When Lifting From Horizontal to Vertical
  • Replacement Parts Are Same As for Standard “GX” Clamps
  • Note: The Pad and Cam Should Be Replaced at the Same Time
  • Clamps Are 100% Proof Tested and Certificate of Test Suppliedwith Each Clamp
  • Minimum WLL of at Least 10% of the Maximum WLL
More Information
VendorCampbell® Chain & Fittings
Apex Catalog Number6423105
UPC020418177347
Minimum Grip Width1/16 in
Maximum Grip Width3/4 in
Working Load Limit2204 lb (1 Metric Ton)
Dimension A (in.)4-3/4 in
Dimension B (in.)11 5/16 in
Dimension C (in.)2-5/8 in
Dimension D (in.)3-1/16 in
Dimension E (in.)2-1/16 in
Dimension F (in.)4-7/8 in
Dimension G (in.)3-9/16 in
Dimension H (in.)1-21/32 in
Dimension I (in.)5-13/16 in