EN-7-HDG: 5/8-11 x 1-3/8 in long Style A-Elongated Eye Nut from Hot Dip Galvanized Drop Forged Carbon Steel Made in U.S.A.
The EN-7-HDG: 5/8-11 x 1-3/8 in long Style A-Elongated Eye Nut from Hot Dip Galvanized Drop Forged Carbon Steel Made in U.S.A. has a 5,000 lb. Rated Capacity. Rated Capacities are based on a 5 to 1 Design Factor. The Rated Capacities listed are for Eye Nuts only, based on vertical pulls and not connected to bolts or studs.
EN-7-HDG: 5/8-11 x 1-3/8 in long Style A-Elongated Eye Nut from Hot Dip Galvanized Drop Forged Carbon Steel Made in U.S.A.
Provided by Industrial Hardware and Specialties is the EN-7-HDG: 5/8-11 x 1-3/8 in long Style A-Elongated Eye Nut from Hot Dip Galvanized Drop Forged Carbon Steel Made in U.S.A.. These Style A-Elongated Eye Nuts are Drop Forged from C1030 Carbon Steel to ASTM A105 and Hot Dip Galvanized to ASTM A153. It has a 5/8-11 ( UNC* ) diameter thread pitch with an internal thread length that is 3/4" long. The Eye Nut has an inside Diameter of 1-1/2", an outside diameter of 2-1/2", and an overall length of 3".
Style A-Elongated Eye Nut Rated Key Features
- Rated Capacity : 5,000 lbs
- Drop Forged C1030 Carbon Steel
- Hot Dip Galvanized to ASTM A153
- Tapped UNC* *Tapped 0.021in Oversize
Knowledge Base
If your looking for more information on Eye Nuts checkout the Industrial Hardware and Specialties Knowledge Base
| Product Type | Style A-Elongated Eye Nut |
|---|---|
| Thread Standard | U.S. Standard |
| Bolt Diameter-TPI | 5/8-11 |
| ID | 1-1/2 in |
| Eye O.D. | 2-1/2 in |
| Rated Capcity lbs. | 5,000 |
| Material | Drop-Forged C1030 Carbon Steel |
| Plating/Coating | Hot Dip Galvanized |
| Thread Length | 3/4 in |
| Bail Diameter | 1/2 in |
| Overall Length | 3 in |
| Specification | ASTM A105 |
| Fit | UNC* |
