Diamond point design cuts and clears debris during installation for better thread engagement
Blue ceramic coating exceeds 500/hrs. salt spray resistance
ACQ compatible
Meets ASTM A 510 for carbon steel manufacturing
Miami-Dade County Product Control Approved. NOA-15-0930.14
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
Pre-drill a hole using a carbide masonry drill bit a minimum 1/4" deeper than than the screw length you wish to install. Install screw with a proper sized hex drive bit Making sure fastener head sits flush with work surface. Do not over torque as head may snap or cause stripping of recess. To be installed in masonary applications such as concrete, brick, or cement blocks.
Phillips Flat Head, Hi-Low, Notched Threads, Diamond Point, Blue Ceramic Coating
Notched threads for cutting into concrete, brick and cement block
Diamond point design cuts and clears debris during installation for better thread engagement
Blue ceramic coating exceeds 500/hrs. salt spray resistance
ACQ compatible
Meets ASTM A 510 for carbon steel manufacturing
Miami-Dade County Product Control Approved. NOA-15-0930.14
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
Pre-drill a hole using a carbide masonry drill bit a minimum 1/4" deeper than than the screw length you wish to install. Install screw with proper sized phillips drive bit Making sure fastener head sits flush with work surface. Do not over torque as head may snap or cause stripping of recess.