Pole Gripper

hexhead
hexheadwasher
hexhead17
hexhead17washer

Unslotted Indented Hi-Hex Washer Head w/Shoulder, Type S, Quad-Shield Coated

    Used in roofing and siding applications
  • ACQ compatible
  • Rust/Acid rain protection
  • Quad-Shield coating exceeds 1,000/hr. salt spray resistance
  • High degree of corrosion resistance
  • Diameter:#9
  • Lengths : 1"-3"
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
hexhead
A hex nut setter or drive socket with torque limiting nose piece set at a maximum of 2500RPM drive speed recomended.The fastener is completly installed when it is embedded a minimum of 1/2" into substrate. Do not over torque as it can cause the head to snap, or damage to the work surface.

Unslotted Indented Hi-Hex Washer Head w/Shoulder and 304 Stainless Steel Bonded Washer, Type S, Quad-Shield Coated

  • Used in roofing and siding applications
  • Bonded washer creates leak proof seal
  • ACQ compatible
  • Rust/Acid rain protection
  • Quad-Shield coating exceeds 1,000/hr. salt spray resistance
  • High degree of corrosion resistance
  • Diameter:#9
  • Lengths : 1"-3"
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
hexheadwasher
A hex nut setter or drive socket with torque limiting nose piece set at a maximum of 2500RPM drive speed recomended.The fastener is completly installed when it is embedded a minimum of 1/2" into substrate. Do not over torque as it can cause the head to snap, or damage to the work surface.

Unslotted Indented Hi-Hex Washer Head w/Shoulder, Hi-Low Thread, Type ‘17’, Quad-Shield Coated

  • Used in roofing and siding applications
  • ACQ compatible
  • Rust/Acid rain protection
  • Quad-Shield coating exceeds 1,000/hr. salt spray resistance
  • High degree of corrosion resistance
  • Diameter:#10
  • Lengths : 1"-3"
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
flathead
A hex nut setter or drive socket with torque limiting nose piece set at a maximum of 2500RPM drive speed recomended.The fastener is completly installed when it is embedded a minimum of 1/2" into substrate. Do not over torque as it can cause the head to snap, or damage to the work surface.

Unslotted Indented Hi-Hex Washer Head w/Shoulder and 304 Stainless Steel Bonded Washer, Hi-Low Thread, Type '17', Quad-Shield Coated

  • Used in roofing and siding applications
  • Bonded washer creates leak proof seal
  • ACQ compatible
  • Rust/Acid rain protection
  • Quad-Shield coating exceeds 1,000/hr. salt spray resistance
  • High degree of corrosion resistance
  • Diameter:#10
  • Lengths : 1"-3"
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
flathead
A hex nut setter or drive socket with torque limiting nose piece set at a maximum of 2500RPM drive speed recomended.The fastener is completly installed when it is embedded a minimum of 1/2" into substrate. Do not over torque as it can cause the head to snap, or damage to the work surface.
View as Grid List

4 Items

per page
Set Descending Direction