Stainless Steel

flat17
bugle17
buglehead
bugleheadcorase
hexwasherhead
Hex Washer Head w sealing
panhead
flathead
modifiedtruss

Trim Head Sharp Point

  • Lengths: 1-5/8" - 3"
  • Superior penetration through a variety of woods
  • Type ’17’ reduces wood splitting
  • High degree of corrosion resistance
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
flat17
A standard screw gun with torque limiting nose piece set at a maximum of 3000 RPM drive speed recommended. Use a T-15 StarDrive bit. Do not over torque as it can cause the head to snap or damage to the work surface.

Flat Head w/Nibs Coarse Thread, Type '17'

  • Lengths: 1-1/4" - 4"
  • Superior penetration through a variety of woods
  • Star drive prevents cam out and stripping for improved driveability
  • Type ’17’ reduces wood splitting
  • High degree of corrosion resistance
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
bugle17
A standard screw gun with torque limiting nose piece set at a maximum of 3000 RPM drive speed recommended. Use a T-25 Stardrive bit. Do not over torque as it can cause the head to snap or damage to the work surface.

Bugle Head, Coarse Thread,Type '17'

  • Lengths: 1-5/8" - 3-1/2"
  • Type ’17’ reduces wood splitting
  • For use in pressure treated lumber
  • High degree of corrosion resistance
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
buglehead
A standard screw gun with torque limiting nose piece set at a maximum of 3000 RPM drive speed recommended. Use a T-25 Stardrive bit. Do not over torque as it can cause the head to snap or damage to the work surface.

Bugle Head Coarse Thread

  • Lengths: 3/4" - 6"
  • Used in fencing, decks, patio furniture, spas
  • High degree of corrosion resistance
  • For use in non-magnetic applications
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
bugleheadcorase
A standard screw gun with torque limiting nose piece set at a maximum of 3000 RPM drive speed recommended.The fastener is completely installed when the fastener head is seated flush with the work surface. Do not over torqueas it can cause the head to snap or damage to the work surface.

Hex Washer Head

  • Zinc Plated or 410 Stainless Steel
  • Lengths:3/8"-6"
  • Meets ASTM C 1513 for cold-formed steel framing connections
  • Meets F.I.P.-1000.7 for torsional strength & drill speed
  • Manufactured to SAE J78 for dimensional specifications
  • Meets ASTM A 510 for carbon steel manufacturing
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
hexwasherhead
A hex nut setter or drive socket with torque limiting nose piece set.Do not over torque as it can cause the head to snap or stripping of the threads. Installed fasteners must penetrate a minimum of threefull threads beyond the metal structure.

Hex Washer Head w/Sealing Washer

  • Zinc Plated or 410 Stainless Steel
  • Lengths:12"-6"
  • Meets ASTM C 1513 for cold-formed steel framing connections
  • Meets F.I.P.-1000.7 for torsional strength & drill speed
  • Manufactured to SAE J78 for dimensional specifications
  • Meets ASTM A 510 for carbon steel manufacturing
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
hexwasherwsealing
A hex nut setter or drive socket with torque limiting nose piece set.Do not over torque as it can cause the head to snap or stripping of the threads. Installed fasteners must penetrate a minimum of threefull threads beyond the metal structure.

Pan Head

  • Zinc Plated or 410 Stainless Steel
  • Lengths: 3/8"-3"
  • Meets ASTM C 1513 for cold-formed steel framing connections
  • Meets F.I.P.-1000.7 for torsional strength & drill speed
  • Manufactured to SAE J78 for dimensional specifications
  • Meets ASTM A 510 for carbon steel manufacturing
  • Meets ASTM F1941 for corrosion resistance
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
panhead
A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended. Use a #2 reducedPhillips drive bit. Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate aminimum of three full threads beyond the metal structure.

Flat Head

  • Zinc Plated or 410 Stainless Steel
  • 1/2"-3"
  • Meets ASTM C 1513 for cold-formed steel framing connections
  • Meets F.I.P.-1000.7 for torsional strength & drill speed
  • Manufactured to SAE J78 for dimensional specifications
  • Meets ASTM A 510 for carbon steel manufacturing
  • Meets ASTM F1941 for corrosion resistance
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
flathead
A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended. Use a #2 reducedPhillips drive bit. Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate aminimum of three full threads beyond the metal structure.

Modified Truss (R/W) Head

  • Zinc Plated, Black Oxide or 410 Stainless Steel
  • Lengths: 1/2"-3"
  • Meets ASTM C 1513 for cold-formed steel framing connections
  • Meets F.I.P.-1000.7 for torsional strength & drill speed
  • Manufactured to SAE J78 for dimensional specifications
  • Meets ASTM A 510 for carbon steel manufacturing
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
modifiedtruss
A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended.Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate aminimum of three full threads beyond the metal structure.
View as Grid List

2 Items

per page
Set Descending Direction