Hager 256S Manual Wall Stop and Holder US3 Stock No 068146
The Hager 256S Manual Wall Stop and Holder US3 Stock No 068146 is also known as part number #256S000000000300. Purchase Hager Trim & Auxilary parts today from Industrial Hardware and Specialties.
The Hager 256S Manual Wall Stop and Holder US3 Stock No 068146 is the perfect finishing touch to your building project. With it's US3 finish you can be sure that your trim device can match any design needs.The Hager Item Number #256S000000000300is a 2-1/4" round diameter base, 5-11/16" engaged projection manuel wall stop and holder. The 256S is made cast brass with black rubber bumper and is used on concrete walls. Whatever you need, from pulls to push plates, protection plates to door edgings, wall and floor stops to flush bolts, coordinators, signage, and much more - Hager trim & auxiliary products give you great looks and proven durability.
Hager 256S Manual Wall Stop and Holder US3 Stock No 068146
- Certification: Meets ANSI A156.16 for L01341
- Base Diameter: 2-1/4 in. (57 mm)
- Base Projection: 3-3/4 in. (95 mm)
- Engaged Projection: 5-11/16 in. (145 mm)
- Keeper: 25/32 in. x 1-1/2 in. (20 mm x 38 mm)
- Materials: Cast brass with black rubber bumper
- Finishes: US3 . US10 . US10B . US15 . US26 . US26D
- Fasteners: Three (3) #10 x 1 in. OPHWS and three (3) plastic anchors
- Notes:
- For use on drywall
- Ideal for interior and exterior applications
- Heavy duty - for use in high traffic areas
- Unit functions as a stop . but can serve as a ôHold Open in. when hook is manually engaged
- Ideal for use with locksets with a projection of 3 in. (76 mm) or less
| Vendor | Hager |
|---|---|
| Series | 256S-Manual Wall Stop & Holder |
| Finish (Fin.) | US3 - Bright Brass |
| Base Dimension (in.) | 2-1/4 Ø |
| Projection (in.) | 5-11/16 |
| Fasteners Included | Three (3) #10 x 1" OPHWS and three (3) plastic anchors |
| Hager Item Number | 256S000000000300 |
| Hager UPC | 041359681465 |
| Hager Part Number | 256S US3 |
| Catalog | Trim & Auxiliary Catalog |
