Hager 3115 2-3/4 US26 SCC KA ASA1D Grade 1 Deadlock Stock No 149175
The Hager 3115 2-3/4 US26 SCC KA ASA1D Grade 1 Deadlock Stock No 149175 is suitable for doors 1-3/4" - 2" in thickness. It's equipped with a 2-3/4" backset, Schlage C (Standard) keyway, Keyed Alike, 5-pin keyed, 3929 ASA Deadbolt Strike, and a 1-1/8" wide square corner faceplate.
If your looking for more information on the Hager 3115 US26 Deadlock Stock no 149175. Check out the Industrial Hardware and Specialties Inc. Knowledge Base. Here you will find product specifications, templates, installation guides , and all other related files for all Hager 3100 Series Deadlocks.
Provided by Industrial Hardware and Specialties is the Hager 3115 2-3/4 US26 SCC KA ASA1D Grade 1 Deadlock Stock No 149175. All Hager 3115 Cylinder x Thumbturn-ANSI E2151 series locks operate with the Deadbolt thrown. Either by retracted key from the outside or by thumbturn on the inside. The Bolt will automatically deadlock when fully thrown. With the deadlocks US26-Polished Chrome finish, the Hager stock number 149175 is both tough and attractive, blending seamlessly with office or home design styles. This 3100 Series Deadlock is a perfect complement to Hager 3400 Series lockset. This deadlock will provide extra protection against break-in and has a lifetime warranty. The Hager Item Number 311502N2600000CAC is suitable for doors 1-3/4" - 2" in thickness. It's equipped with a 2-3/4" backset, Schlage C (Standard) keyway, Keyed Alike, 5-pin keyed, 3929 ASA Deadbolt Strike, 1-1/8" wide square corner faceplate. Hager 3115 Series Single Cylinder Deadlocks are model equivalent to the INOX CX660, Dorma D860, Schlage B660P, and Cal-Royal CRB800. Order today from Industrial Hardware and Specialties in Paterson, NJ.
Hager 3115 2-3/4 US26 SCC KA ASA1D Grade 1 Deadlock Stock No 149175
| Certifications: | - BHMA Certified ANSI A156.5 Grade 1 - ANSI A250.13 Severe Windstorm Resistant Component - UL/cUL Listed for all functions up to 3 hours for "A" single doors - UL10B Neutral Pressure Rated - UL10C Positive Pressure Rated - ADA - Thumbturn |
| Exposed Trim: | - Wrought brass or bronze |
| Mechanism: | - Steel, zinc dichromate plating |
| Keys: | - Two operating keys supplied per lock |
| Cylinders: | - Brass 6-pin - Keyed Different - Schlage C Keyway - standard - Cylinder drilled 6 pin, Keyed 5 pin - standard - Other keying options, including keyed 6 pin, available from factory - Zero bit cylinders will be 6 pin, keyed - standard - SFIC uncombinated or combinated, brass 6 pin or 7 pin cores sold separately |
| Door Thickness: | - 1-3/4" - 2" (45 mm - 51 mm) - Standard - 2" - 2-1/4" (57 mm) available for conventional cylinder - Must specify |
| Backset: | - 2-3/4" (70 mm) - Standard - 2-3/8" (60 mm) - Optional |
| Latchbolt: | - 1" (25 mm) Throw - Brass with concealed hardened steel roller to prevent sawing or cutting - 1-1/8" x 2-1/4" (29 mm x 57 mm) square corner faceplate |
| Strikes: | - 3930 Square Corner, 1-1/8" x 2-3/4" (70 mm) with dustbox - Standard - 3929 ASA Deadbolt Strike - Optional |
| Standard door prep: | - Cylinder hole: 2-1/8" (54 mm) diameter (cross bore) - Latch hole: 1" (25 mm) diameter (edge bore) |
| Finishes: | - US3, US4, US10, US10B, US26, US26D |
| Functions: | - 15 - Cylinder x Thumbturn |
| Options: | - Split finish - Additional deadbolts and strikes available |
| Vendor | Hager |
|---|---|
| Function (Fn.) | 3115 Single Cylinder-E2151 |
| Backset | 2-3/4 in. (70 mm) |
| Faceplate | 1-1/8 in. Wide Square Corner |
| Hall Finish (Hall) | US26 Polished Chrome |
| Room Finish (Room) | US26 Polished Chrome |
| Cylinder | Conventional Core |
| Conventional Keyway (CK) | SCC - Schlage C ( Standard ) |
| Keying | KA- Keyed Alike |
| Strike Plate | ASA - #3929 |
| Door Thickness | 1-3/4" - 2" |
| Key Pinning (KP) | 5-pin keyed |
| Hager Part Number | 3115 2-3/4" US26 SCC KA ASA1D |
| Hager Item Number | 311502N2600000CAC |
| Hager UPC | 798550491750 |
| Keys Included | 2 Keys (Standard) |
| Catalog | 3100 Series Catalog |
| Schlage | B660P |
| INOX | CX660 |
| Dorma | D860 |
| Cal-Royal | CRB800 |
