Hager 3115 2-3/4 US3 SCC KA Grade 1 Deadlock Stock No 098267

SKU
2BA-098267
Special Price $ 83.54 Regular Price $ 118.98

 Hagerco logo 

The Hager 3115 2-3/4 US3 SCC KA Grade 1 Deadlock Stock No 098267 is suitable for doors 1-3/4" - 2" in thickness. It's equipped with a 2-3/4" backset, Schlage C (Standard) keyway, Keyed Alike, 5-pin keyed, 3930 NL Strike (Standard), and 1-1/8" wide square corner faceplate.

If your looking for more information on the Hager 3115 US3 Deadlock Stock no 098267. Check out the Industrial Hardware and Specialties Inc. Knowledge Base. Here you will find product specifications, templates, installation guides , and all other related files for all Hager 3100 Series Deadlocks.

Attributes

Provided by Industrial Hardware and Specialties is the Hager 3115 2-3/4 US3 SCC KA Grade 1 Deadlock Stock No 098267. All Hager 3115 Cylinder x Thumbturn-ANSI E2151 series locks operate with the Deadbolt thrown. Either by retracted key from the outside or by thumbturn on the inside. The Bolt will automatically deadlock when fully thrown. With the deadlocks US3-Bright Brass finish, the Hager stock number 098267 is both tough and attractive, blending seamlessly with office or home design styles. This 3100 Series Deadlock is a perfect complement to Hager 3400 Series lockset. This deadlock will provide extra protection against break-in and has a lifetime warranty. The Hager Item Number 311502N3000000CA is suitable for doors 1-3/4" - 2" in thickness. It's equipped with a 2-3/4" backset, Schlage C (Standard) keyway, Keyed Alike, 5-pin keyed, 3930 Square Corner, 1-1/8'' x 2-3/4'' with dustbox strike ( Standard ), 1-1/8" wide square corner faceplate. Hager 3115 Series Single Cylinder Deadlocks are model equivalent to the INOX CX660, Dorma D860, Schlage B660P, and Cal-Royal CRB800. Order today from Industrial Hardware and Specialties in Paterson, NJ.

Hager 3115 2-3/4 US3 SCC KA Grade 1 Deadlock Stock No 098267


Certifications: - BHMA Certified ANSI A156.5 Grade 1
- ANSI A250.13 Severe Windstorm Resistant Component
- UL/cUL Listed for all functions up to 3 hours for "A" single doors
- UL10B Neutral Pressure Rated
- UL10C Positive Pressure Rated
- ADA - Thumbturn

Exposed Trim: - Wrought brass or bronze

Mechanism: - Steel, zinc dichromate plating

Keys: - Two operating keys supplied per lock

Cylinders: - Brass 6-pin - Keyed Different - Schlage C Keyway - standard
- Cylinder drilled 6 pin, Keyed 5 pin - standard
- Other keying options, including keyed 6 pin, available from factory
- Zero bit cylinders will be 6 pin, keyed - standard
- SFIC uncombinated or combinated, brass 6 pin or 7 pin cores sold separately

Door Thickness: - 1-3/4" - 2" (45 mm - 51 mm) - Standard
- 2" - 2-1/4" (57 mm) available for conventional cylinder - Must specify

Backset: - 2-3/4" (70 mm) - Standard
- 2-3/8" (60 mm) - Optional

Latchbolt: - 1" (25 mm) Throw - Brass with concealed hardened steel roller to prevent sawing or cutting
- 1-1/8" x 2-1/4" (29 mm x 57 mm) square corner faceplate

Strikes: - 3930 Square Corner, 1-1/8" x 2-3/4" (70 mm) with dustbox - Standard
- 3929 ASA Deadbolt Strike - Optional

Standard door prep: - Cylinder hole: 2-1/8" (54 mm) diameter (cross bore)
- Latch hole: 1" (25 mm) diameter (edge bore)

Finishes: - US3, US4, US10, US10B, US26, US26D

 Functions:
 - 15 - Cylinder x Thumbturn

Options: - Split finish
- Additional deadbolts and strikes available

More Information
VendorHager
Function (Fn.)3115 Single Cylinder-E2151
Backset2-3/4 in. (70 mm)
Faceplate1-1/8 in. Wide Square Corner
Hall Finish (Hall)US3 Bright Brass
Room Finish (Room)US3 Bright Brass
CylinderConventional Core
Conventional Keyway (CK)SCC - Schlage C ( Standard )
KeyingKA- Keyed Alike
Strike Plate#3930 with dustbox (Standard)
Door Thickness1-3/4" - 2"
Key Pinning (KP)5-pin keyed
Hager Part Number3115 2-3/4" US3.SCC.KA
Hager Item Number311502N3000000CA
Hager UPC041359982678
Keys Included2 Keys (Standard)
Catalog3100 Series Catalog
SchlageB660P
INOXCX660
DormaD860
Cal-RoyalCRB800