Hager 790-904 Half Mortise 95in Hinge Stock No 052993
If your looking for more information on the The Hager 790-904 Half Mortise 95in Hinge Stock No 052993. Check out the Industrial Hardware and Specialties Inc. Knowledge Base. Here you will find product specifications, templates, installation guides , and all other related files for all Hager Stainless Steel Hinges
From Industrial Hardware and Specialties comes the Hager 790-904 Half Mortise 95in Hinge Stock No 052993. This 790-904 Series heavy duty stainless steel continuous hinge is designed and engineered to evenly distribute door weight along the full length of the door, which eliminates localized stresses on the frame and reduces hinge failure. All 790 Series stainless steel continuous hinges are always installed flush with the top edge of the door, and are brushed to a satin finish (US32D). The Hager 790-904 Half Mortise 95in Hinge Stock No 052993 is constructed 14-gauge type 304 stainless steel with lubricated nylon 6/6 bearings between each knuckle and stainless steel pin.
Hager 790-904 Half Mortise 95in Hinge Stock No 052993
| Clearance: | - 1/8" (3.2 mm) minimum hinge side - Plus standard lockside clearance |
| Fasteners: | - #10-24 x 5/8" S/S Dril-Kwik (R) (metal frame) - #1/4-20 x 3/4" 2C Dril-Kwik (R) (metal door) - #10-16 x 1-1/4" S/S Type AB (wood door) |
| Length Options: | - Standard |
| Door Reinforcement: | - None required |
| Frame Reinforcement: | - None required to 200 lbs. Heavier weight use 16-gauge channel. |
| Fire Rating: | - Up to 3 hr. metal and 90 min. wood composite |
| Electric Modifications: | - Power Transfer Preparation (EPT 2) or (EPT 10) |
| Special Features: | - 1/4" (6.3 mm) diameter Stainless Steel Pin - Dual 6/6 Nylon bearings between each knuckle - Not recommended for doors with a beveled edge on the hinge side - Useful for ADA upgrade work - 1/8" (3.2 mm) inset |
| Note: | - Any nonstandard length hinge may require a custom hole pattern based on the requested length. Consult Hager Companies to address the field prep for the doors and frames. |
| Vendor | Hager |
|---|---|
| Style (Styl.) | Half Mortise |
| Series | 790-904 |
| Hinge Length (Len) | 95" |
| Handing (Hand.) | Non-Handed |
| Finish (Fnsh.) | US32D |
| Tips (Tips) | No Tip |
| Fasteners (Fstnrs.) | #10-24 x 5/8" S/S Dril-Kwik (R) (metal frame) & #1/4-20 x 3/4" 2C Dril-Kwik (R) (metal door) & #10-16 x 1-1/4" S/S Type AB (wood door) |
| Hager Item Number | PS904095032D000001 |
| Hager UPC | 041359529934 |
| Hager Part Number | 790-904 95" US32D 1PK |
| Hager Template | Template |
| Catalog | Stainless Steel Continuous Hinges Door Hardware Catalog |
