M12-A: M12 x 1.75 x 25.4mm Long Full Thread Shoulder Pattern Eyebolt Carbon Steel Self-Colored - Made in the USA
M12-A: M12 x 1.75 x 25.4mm Long Full Thread Shoulder Pattern Eyebolt Carbon Steel Self-Colored - Made in the USA
Provided by Industrial Hardware and Specialties is the M12-A: M12 x 1.75 x 25.4mm Long Full Thread Shoulder Pattern Eyebolt Carbon Steel Self-Colored - Made in the USA. These M12 x 1.75 Shoulder Pattern Eyebolts have a 25.4mm long fully threaded shank. They feature a 30.0mm inside diameter for hanging fittings, or hoisting loads. With a rated capacity of 2,266lbs / 1,030kgs when used in straight vertical lifts.When used in non-vertical lifts under 45 degrees the rated capacity is 566.50lbs. Under no circumstances should Shoulder Eyebolts be used for angular lifts greater than 45 degrees. Made in the USA from Self-Colored Drop Forged Carbon Steel.
Eyebolt Rated Capacity Guidelines
- Eyebolts are designed with a 5:1 Safety Factor
- The minimum threaded shank length of Eyebolts must be one thread diameter to attain the rated capacity
- Regardless of the 5:1 Safety Factor, no greater load should be applied to an Eyebolt than the Rated Capacity listed
Knowledge Base
If your looking for more information on Eyebolts checkout the Industrial Hardware and Specialties Knowledge Base
| Product Type | Eyebolt |
|---|---|
| Thread Standard | Metric |
| Bolt Diameter-TPI | M12 x 1.75 |
| Shank Length | 25.4mm |
| ID | 30.0mm |
| Eye O.D. | 54.0mm |
| Rated Capcity lbs. | 2,266 |
| Rated Capcity kg | 1,030 |
| Pattern | Shoulder Pattern |
| Material | Drop-Forged Carbon Steel |
| Plating/Coating | Self-Colored |
| Rated Capacity 45 Deg. lbs. | 566.50 |
| Rated Capacity 46+ | Shoulder Eyebolts should not be used for angular lifts greater than 45 degrees; Safety Swivel Hoist Rings are recommended for such applications. |
| Thread Style | Full Thread |
| Thread Length | 25.4mm |
| Fit | 6g |
