N2027-24: 5/8-11 x 24 in Long with 6 in Thread Shoulder Pattern Eyebolt with Nut Hot-Dip Galvanized Carbon Steel - Made in the USA

SKU
59A-N2027-24
Special Price $ 38.87 Regular Price $ 53.51
N2027-24: 5/8-11 x 24 in Long with 6 in Thread Shoulder Pattern Eyebolt with Nut with 1-3/8 in ID Eye From Drop Forged Carbon Steel Hot Dip Galvanized to ASTM A153 - WLL 3,500 lbs. Made in the U.S.A.
Attributes

N2027-24: 5/8-11 x 24 in Long with 6 in Thread Shoulder Pattern Eyebolt with Nut Hot-Dip Galvanized Carbon Steel - Made in the USA


Provided by Industrial Hardware and Specialties is the N2027-24: 5/8-11 x 24 in Long with 6 in Thread Shoulder Pattern Eyebolt with Nut Hot-Dip Galvanized Carbon Steel - Made in the USA. These 5/8-11 Shoulder Pattern Eyebolt with Nuts have a 24" long shank, with 6" of thread. They feature a 1-3/8" inside diameter for hanging fittings, or hoisting loads. With a rated capacity of 3,500lbs / 1,588kgs when used in straight vertical tension applications. Made in the USA from Drop Forged Carbon Steel Hot Dip Galvanized to ASTM A153.

Eyebolt Rated Capacity Guidelines


  • Eyebolts are designed with a 5:1 Safety Factor
  • The minimum threaded shank length of Eyebolts must be one thread diameter to attain the rated capacity
  • Regardless of the 5:1 Safety Factor, no greater load should be applied to an Eyebolt than the Rated Capacity listed

Knowledge Base


If your looking for more information on Eyebolts checkout the Industrial Hardware and Specialties Knowledge Base

eyebolt lift suggestions
More Information
Product TypeEyebolt w/nut
Thread StandardU.S. Standard
Bolt Diameter-TPI5/8-11
Shank Length24 in
ID1-3/8 in
Eye O.D.2-1/2 in
Rated Capcity lbs.3,500
Rated Capcity kg1,588
PatternShoulder Pattern
MaterialDrop-Forged Carbon Steel
Plating/CoatingHot Dip Galvanized
Rated Capacity 45 Deg. lbs.875
Rated Capacity 46+

Shoulder Eyebolts should not be used for angular lifts greater than 45 degrees; Safety Swivel Hoist Rings are recommended for such applications.

Thread StylePartial Thread
Thread Length6 in
FitUNC-2A*