Campbell #6421001 SAC (Screw-Adjusted Cam) Plate Clamps - 0 to 2 in. Grip Range - 3 Metric Ton WLL
The Campbell #6421001 SAC (Screw-Adjusted Cam) Plate Clamps - 0 to 2 in. Grip Range - 3 Metric Ton WLL from Industrial Hardware and Specialties is capable of handling steel plate or fabricated structures from horizontal through a 180 degree arc. The Campbell UPC number 020418096402 has a working load limit of a 3 metric ton, and a 0" to 2" grip range. Made in the USA
The Campbell #6421001 SAC (Screw-Adjusted Cam) Plate Clamps - 0 to 2 in. Grip Range - 3 Metric Ton WLL is a versatile American Made clamp capable of handling steel plate or fabricated structures from horizontal through a 180 degree arc. The clamp has a Working Load Limit of 3 metric ton and a grip range of 0" to 2". The Campbell 6421001 can be used for vertical, vertical/turn or horizontal lifts. The Campbell Screw Adjusted Cam clamp has a convex, serrated cam that swivels on a ball joint. This clamp has a minimum number of moving parts.You can purchase the Campbell #6421001 at Industrial Hardware and Specialties today.
Campbell #6421001 SAC (Screw-Adjusted Cam) Plate Clamps - 0 to 2 in. Grip Range - 3 Metric Ton WLL
- Recommended for Turning Plates From Horizontal to Vertical As Well As Through A 180° Arc
- The Convex, Serrated Cam Swivels on A Ball Joint SoThat the Area of Cam Engagement Increases As Load Increases
- Drop Forged Body and Shackle
- Clamps Are 100% Proof Tested and Certificate of Test Supplied with Each Clamp
- Minimum WLL of at Least 10% of the Maximum WLL
- Note: Clamp Features a Torque Limiting Handle to Prevent Over tightening. Screw Needs to Be Hand Tight Only! Do Not Overtighten.
| Vendor | Campbell® Chain & Fittings |
|---|---|
| Apex Catalog Number | 6421001 |
| UPC | 020418096402 |
| Minimum Grip Width | 0 in |
| Maximum Grip Width | 2 in |
| Working Load Limit | 6613 lb (3 Metric Ton) |
| Dimension C (in.) | 6-1/2 in |
| Dimension D (in.) | 1-7/8 in |
| Dimension F (in.) | 3-3/8 in |
| Dimension G (in.) | 3/4 in |
| Dimension H (in.) | 2-3/8 in |
| Dimension I (in.) | 3-3/4 in |
| Dimension O (in.) | 9-1/4 in |
| Dimension P (in.) | 1-13/16 in |
