Simpson Strong-Tie AT-XP30 Acrylic Anchoring Adhesive 30 oz. w/ Nozzle

Key Features

• Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads
• Code listed under the IBC/IRC for cracked and uncracked concrete per IAPMO UES ER-263 and City of L.A. RR25960
• Code listed under the IBC/IRC for masonry per IAPMO UES ER-281 and City of L.A. RR25966
• AT-XP is code listed for installation with the Speed Clean^™ DXS system without any further cleaning (AT-XP: IAPMO-UES ER-263)
• 10:1 two-component high-strength, acrylic-based anchoring adhesive
• Suitable for use under static and seismic loading conditions in cracked and uncracked concrete as well as masonry
• Easy hole-cleaning procedure — no power-brushing required
• Suitable for use in dry or water-saturated concrete
• For best results, store between 14°F (–10°C) and 80°F (27°C)
• Cures in substrate temperatures as low as 14°F (–10°C) in 24 hours or less
• Available in 9.4 oz., 12.5 oz. and 30 oz. cartridges for application versatility
• Volatile Organic Compound (VOC) – 30 g/L
• Manufactured in the USA using global materials

Applications

• Threaded rod anchoring and rebar doweling into concrete and masonry
• Suitable for horizontal, vertical and overhead applications

Storage

• For best results store between 14°F–80°F (-10°C–27°C). Partially used cartridges can be stored for a limited time by leaving nozzle in place. To re-use, attach new nozzle.

Shelf Life

• 12 months from date of manufacture in unopened container

Installation

• Surfaces to receive adhesive must be clean.
• Base material temperature must be 14°F or above at the time of installation. For best results, material should be 14°F (–10°C) to 80°F (27°C) at time of application.
• To warm cold material, store cartridges in a warm, uniformly heated area or storage container. Do not immerse cartridges in water to facilitate warming.
• Mixed material in nozzle can harden in 3–4 minutes at temperatures of 70°F (21°C) and above.
• Use only Simpson Strong-Tie mixing nozzles in accordance with Simpson Strong-Tie instructions. Modification or improper use of mixing nozzle may impair AT-XP adhesive performance.