Simpson Strong-Tie SET3G22-N Epoxy Anchoring Adhesive 22 oz. Tube w/ Nozzle

SKU
19S-SET3G22-N
Special Price $ 50.47 Regular Price $ 71.92
Simpson Strong-Tie SET3G22-N Epoxy Anchoring Adhesive 22 oz. Tube w/ Nozzle is available to buy in increments of 1

Simpson Strong-Tie SET3G22-N Epoxy Anchoring Adhesive 22 oz. Tube w/ Nozzle is Made in the USA. The SET3G22-N is a versatile adhesive it can be specified for dry or water-saturated conditions. 1:1 ratio, two-component, high-strength, epoxy-based anchoring adhesive formula. One EMN21I mixing nozzle and one extension are supplied with each cartridge.

Attributes

Simpson Strong-Tie SET3G22-N Epoxy Anchoring Adhesive 22 oz. Tube w/ Nozzle


Simpson Strong-Tie SET3G22-N Epoxy Anchoring Adhesive 22 oz. Tube w/ Nozzle is formulated to provide superior performance in cracked and uncracked concrete at elevated temperatures (110°F). It installs and performs in a variety of environmental conditions and temperature extremes. The exceptional bond strength of SET-3G Adhesives result in high design strengths. When properly mixed, SET-3G will be a uniform gray color

Key Features


  • Exceptional performance — superior bond-strength values at even long-term elevated temperature of 110°F (43°C) using optimized drill bit diameters
  • Tested in accordance with ICC-ES AC308 and ACI 355.4 for use in cracked and uncracked normal-weight and lightweight concrete
  • Design flexibility — can be specified for dry or water-saturated conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C)
  • Jobsite versatility — can be installed in dry, water-saturated or water-filled holes in base materials with temperatures between 40°F (4°C) and 100°F (38°C)
  • Maximized production and safety — qualified for installation using the Speed Cleanâ„¢ DXS dust extraction drilling system as an alternative to the conventional blow-brush-blow hole-cleaning method
  • Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method
  • Available in two cartridge configurations for maximum versatility — 8.5 oz. coaxial or 22 oz. side-by-side cartridges dispensed using manual, battery or pneumatic dispensing tools
  • With higher bond strengths, ductile solutions can often be achieved with SET-3G in high seismic areas
  • 1:1 ratio, two-component, high-strength, epoxy-based anchoring adhesive formula
  • Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
  • Low-odor formulation
  • When properly mixed, SET-3G will be a uniform gray color
  • Volatile organic compound (VOC) — 1.9 g/L
  • Manufactured in the USA using global materials
  • Tested per ACI355.4
  • SET-3G code listed for installation with the Speed Cleanâ„¢ DXS drill bits without any further cleaning (ICC-ES ESR-4057)

Applications


  • Threaded rod anchor and rebar dowel installations in cracked and uncracked concrete under a wide variety of environmental installation and use conditions
  • Installation in downward, horizontal and upwardly inclined (including overhead) orientations
  • Qualified for use in structures assigned to Seismic Design Categories A through F

Installation


  • Surfaces to receive epoxy must be clean per approved hole cleaning method.
  • Base-material temperatures must be 40°F (4°C) or above at the time of installation. For best results, adhesive should be conditioned to a temperature between 70°F (21°C) and 80°F (37°C) at the time of installation.
  • To warm cold adhesive, store cartridges in a warm, uniformly heated area or storage container. Do not immerse cartridges in water or use microwave to facilitate warming.
  • Mixed material can harden in the dispensing nozzle within 30 minutes at 70°F (21°C).
  • Use only Simpson Strong-Tie mixing nozzles in accordance with Simpson Strong-Tie instructions. Modification or improper use of mixing nozzle may impair SET-3G adhesive performance.

Simpson Adhesive Cartridge Estimator: SET-3G

The Adhesive Cartridge Estimator makes it easy to estimate how much adhesive you need for your project! Just Input size and number of adhesive anchors to get the number of adhesive cartridges needed for the job. Just Click Here to be taken to Simpson Strong-Tie Website and begin your estimating.

More Information
Simpson Part NumberSET3G22-N
Cartridge Size22 oz. Side-By-Side Cartridge
Dispensing Nozzles IncludedNozzles Included
ApplicationConcrete: Cracked, Seismic New Construction, Seismic Retrofit, Water and Wastewater Facilities