Stainless Socket Head Vented Shoulder Screw: 3/16 x 1/8

SKU
J30-741-32004
Special Price $ 11.64 Regular Price $ 16.02
Stainless Socket Head Vented Shoulder Screw: 3/16 x 1/8 is available to buy in increments of 1

The J30-741-32004 from Industrial Hardware and Specialties is a chemically cleaned, stainless type 18-8, vented socket head shoulder screw. The vented shoulder screw is 1/8" ( 0.125 ) long with a diameter thread pitch of 8-32 ( UNC-3A ). The Stainless Socket Head Vented Shoulder Screw: 3/16 x 1/8 requires a 3/32" hex socket for installation. The hex socket-socket head vented shoulder screw is drilled with hole to allow for trapped gases to escape. It meets fastener standard ANSI/ASME B18.3, and thread standard ANSI/ASME B1.1.

Attributes

Industrial Hardware and Specialties vented caps screws are ideally suited for fastening inside high vacuum (UV), or ultra high vacuum (UHV) equipment as well as other high pressure environments. The Stainless Socket Head Vented Shoulder Screw: 3/16 x 1/8 comes with a hole drilled through it's head. This feature helps to eliminate the possibility of virtual leaks as the hole allows gas molecules to vent into the vacuum system through the top of fastener and out of the system. This vented shoulder screw is made from stainless steel type 18-8 with a chemically cleaned finish. The J30-741-32004 has a socket head, is 1/8" ( 0.125 ) long with a diameter thread pitch of 8-32 ( UNC-3A ). The Stainless Socket Head Vented Shoulder Screw: 3/16 x 1/8 requires a 3/32" hex socket for installation.

More Information
VendorInSpec
Fastener Type Vented Shoulder Screw
Fastener StandardANSI/ASME B18.3
Drive TypeHex Socket
Head StyleSocket Head
Diameter Thread Pitch (in)8-32
Thread Class FitUNC-3A
Length (in.)1/8
Point TypeFlat or Slightly Concave & Chamfered
MaterialStainless Type 18-8
FinishChemically Cleaned
Thread Standard ANSI/ASME B1.1
Vent Hole Dia. (Nominal) (in.)0.053
Hole Tolerance (in.)+0.005 / -0.005
Drive Size3/32
Head Height (in.)0.156 (5/32)
Head Diameter ⌀0.313 (5/16)