5/16 x 1-1/2 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS)
SKU
20A-1F05
Special Price .61¢ Regular Price .91¢
- Buy 800 for .35¢ each and save 43%
5/16 x 1-1/2 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS) is available to buy in increments of 100
5/16" x 1-1/2" long sleeve anchor with a 1/4" hex nut head from Steel Zinc CR+3 (RoHS). This Hex Nut Masonry Expansion Sleeve Anchor has a minimum 1" embed depth with ultimate holding values of 2522 lb. pullout, and 1675 lb. shear in 4000 psi concrete.
5/16 x 1-1/2 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS)
The 5/16 x 1-1/2 InSpec® Sleeve Anchor Hex Nut Steel Zinc CR+3 (RoHS) is suitable for medium to heavy duty anchoring in all masonry and concrete. They are supplied pre-assembled for ready installation without special tools. The drilled hole and anchor are the same 5/16" diameter for easy attachement. Sleeve expands over full length of bolt.
Product Attributes
- SKU20A-1F05
- Diameter5/16"
- Effective Anchor Length5/16-20 x 1 1/2"
- MaterialSteel
- Surface TreatmentZinc CR+3 (RoHS)
- Min. Embed Depth1"
- Bolt Diameter1/4"
- 4000 PSI Pull Out2522 lbs.
- 4000 PSI Shear1675 lbs.
- Min. Anchor Spacing10 Hole Diameters
- Min. Edge Distance5 Hole Diameters
| Material Grade | Steel Zinc CR+3 (RoHS) |
|---|
