Pole Gripper

hexhead
hexheadwasher
hexhead17
hexhead17washer

Unslotted Indented Hi-Hex Washer Head w/Shoulder, Type S, Quad-Shield Coated

    Used in roofing and siding applications
  • ACQ compatible
  • Rust/Acid rain protection
  • Quad-Shield coating exceeds 1,000/hr. salt spray resistance
  • High degree of corrosion resistance
  • Diameter:#9
  • Lengths : 1"-3"
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
hexhead
A hex nut setter or drive socket with torque limiting nose piece set at a maximum of 2500RPM drive speed recomended.The fastener is completly installed when it is embedded a minimum of 1/2" into substrate. Do not over torque as it can cause the head to snap, or damage to the work surface.

Unslotted Indented Hi-Hex Washer Head w/Shoulder and 304 Stainless Steel Bonded Washer, Type S, Quad-Shield Coated

  • Used in roofing and siding applications
  • Bonded washer creates leak proof seal
  • ACQ compatible
  • Rust/Acid rain protection
  • Quad-Shield coating exceeds 1,000/hr. salt spray resistance
  • High degree of corrosion resistance
  • Diameter:#9
  • Lengths : 1"-3"
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
hexheadwasher
A hex nut setter or drive socket with torque limiting nose piece set at a maximum of 2500RPM drive speed recomended.The fastener is completly installed when it is embedded a minimum of 1/2" into substrate. Do not over torque as it can cause the head to snap, or damage to the work surface.

Unslotted Indented Hi-Hex Washer Head w/Shoulder, Hi-Low Thread, Type ‘17’, Quad-Shield Coated

  • Used in roofing and siding applications
  • ACQ compatible
  • Rust/Acid rain protection
  • Quad-Shield coating exceeds 1,000/hr. salt spray resistance
  • High degree of corrosion resistance
  • Diameter:#10
  • Lengths : 1"-3"
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
flathead
A hex nut setter or drive socket with torque limiting nose piece set at a maximum of 2500RPM drive speed recomended.The fastener is completly installed when it is embedded a minimum of 1/2" into substrate. Do not over torque as it can cause the head to snap, or damage to the work surface.

Unslotted Indented Hi-Hex Washer Head w/Shoulder and 304 Stainless Steel Bonded Washer, Hi-Low Thread, Type '17', Quad-Shield Coated

  • Used in roofing and siding applications
  • Bonded washer creates leak proof seal
  • ACQ compatible
  • Rust/Acid rain protection
  • Quad-Shield coating exceeds 1,000/hr. salt spray resistance
  • High degree of corrosion resistance
  • Diameter:#10
  • Lengths : 1"-3"
Installation
Attaches wood or metal to concrete, brick, cement block or masonry.
flathead
A hex nut setter or drive socket with torque limiting nose piece set at a maximum of 2500RPM drive speed recomended.The fastener is completly installed when it is embedded a minimum of 1/2" into substrate. Do not over torque as it can cause the head to snap, or damage to the work surface.
View as Grid List

20 Items

per page
Set Descending Direction
  1. PG948, pole gripper screws, 9-15 x 3 pole gripper fasteners

    Sku #: 355-PG948

    Indented Hi-Hex Washer Head w/Shoulder 9-15 x 3 Quad-Coated Pole Gripper Screws
    Special Price $148.18 Regular Price $200.05
  2. PG932, pole gripper screws, 9-15 x 2 pole gripper fasteners

    Sku #: 355-PG932

    Indented Hi-Hex Washer Head w/Shoulder 9-15 x 2 Quad-Coated Pole Gripper Screws
    Special Price $193.10 Regular Price $260.69
  3. PG916, pole gripper screws, 9-15 x 1 pole gripper fasteners

    Sku #: 355-PG916

    Indented Hi-Hex Washer Head w/Shoulder 9-15 x 1 Quad-Coated Pole Gripper Screws
    Special Price $257.81 Regular Price $348.05