Hager 282D Manual Flush Bolt Stock No 052284
The Hager 282D Manual Flush Bolt Stock No 052284 is also known as part number #282D00000000010B. Purchase Hager Trim & Auxilary parts today from Industrial Hardware and Specialties.
The Hager 282D Manual Flush Bolt Stock No 052284 is the perfect finishing touch to your building project. With it's US10B finish you can be sure that your trim device can match any design needs.The Hager Item Number #282D00000000010Bis a non-handed manuel flush bolt. The Hager 282D comes equipped with a brass 1" x 6-3/4" faceplate and is for use on hollow metal/fire-rated doors. Whatever you need, from pulls to push plates, protection plates to door edgings, wall and floor stops to flush bolts, coordinators, signage, and much more - Hager trim & auxiliary products give you great looks and proven durability.
Hager 282D Manual Flush Bolt Stock No 052284
- Certifications:
- Fits ANSI A115 door and frame prep
- Meets ANSI A156.16 for L14251
- Face Plate: 1 in. x 6-3/4 in. (25 mm x 172 mm)
- Bolt Head: 1/2 in. (13 mm) square
- Bolt Throw: 3/4 in. (19 mm)
- Standard Rod Length: 12 in. (305 mm) (center of face to corner of door)
- Bolt Backset: 3/4 in. (19 mm)
- Mortise Strike: 15/16 in. x 2-1/4 in. (24 mm x 57 mm)
- Materials: Brass faceplate with steel components
- Notes:
- For use on hollow metal/fire rated doors
- Non-handed
- Bolt head rods are adjustable
- Sold in increments of two.
- 3-Hr fire rating for metal doors up to 4 feet wide by 10 feet tall.
- 282S strike plate bag and 282P bolt head available
- Specify 282R for optional rod length of 18 in. 25 in. or 30 in. (bolt head not included)
| Finish (Fin.) | US10B - Oil Rubbed Bronze |
|---|---|
| Vendor | Hager |
| Hager UPC | 041359522843 |
| Hager Item Number | 282D00000000010B |
| Hager Part Number | 282D US10B |
| Catalog | Trim & Auxiliary Catalog |
