Eye Bolts No Shoulder (Plain Pattern)
Without Shoulder (Plain)
Eye Bolt No Shoulder (Plain) Fully Threaded
Offered In:
Eye Bolt w/Nut No Shoulder (Plain) Partial Thread
Offered In:
- Zinc-Plated Steel
- Hot-Dipped Galvanized steel
- 316 Stainless Steel
- 304 Stainless Steel
- Domestically Produced
Eye Bolt No Shoulder (Plain) No Thread (Blank)
Offered In
- Plain Self-Colored Steel
- Alloy Steel 4140
- 316 Stainless Steel
- 304 Stainless Steel
- Domestically Produced
Eyebolt No Shoulder (Plain) Rated Capacities
Size | Vertical 0º Lbs. | 0º-45º Lbs. |
---|---|---|
1/4 | 500 | N/A |
5/16 | 900 | N/A |
3/8 | 1,300 | N/A |
7/16 | 1,800 | N/A |
1/2 | 2,400 | N/A |
9/16 | 3,000 | N/A |
5/8 | 4,000 | N/A |
3/4 | 5,000 | N/A |
7/8 | 7,000 | N/A |
1 | 9,000 | N/A |
1-1/8 | 12,000 | N/A |
1-1/4 | 15,000 | N/A |
1-1/2 | 21,000 | N/A |
1-3/4 | 28,000 | N/A |
2 | 38,000 | N/A |
2-1/2 | 56,000 | N/A |
NOTE: Plain Eyebolt angular rated capacities are significantly lower than Shoulder Eyebolt rated capacities; therefore, angular lifting is not recommended.
Eyebolt Rated Capacity Guidelines
- Eyebolts are designed with a 5:1 Safety Factor.
- The minimum threaded shank length of Eyebolts must be one thread diameter to attain the rated capacity.
- Regardless of the 5:1 Safety Factor, no greater load should be applied to an Eyebolt than the Rated Capacity listed.
- Plain Eyebolts are not recommended for angular load applications. Only rated for vertical lifts
-
Sku #: 59A-N2002-5
N2002-5: 5/16-18 x 5 in Long with 2-1/2 in Thread Plain Pattern Eyebolt with Nut Hot-Dip Galvanized Carbon Steel - Made in the USASpecial Price $9.23 Regular Price $12.71 -
Sku #: 59A-N2002-4-1/4
N2002-4-1/4: 5/16-18 x 4-1/4 in Long with 2-1/2 in Thread Plain Pattern Eyebolt with Nut Hot-Dip Galvanized Carbon Steel - Made in the USASpecial Price $8.88 Regular Price $12.22 -
Sku #: 59A-K2010-HDG
K2010-HDG: 1-8 x 2-1/2 in Long Full Thread Plain Pattern Eyebolt Hot-Dip Galvanized Carbon Steel - Made in the USASpecial Price $31.00 Regular Price $42.68