Eye Bolts with Shoulder
With Shoulder
Eye Bolt w/Shoulder Fully Threaded
Offered In:
Eye Bolt w/Shoulder with Nut Partial Thread
Offered In:
- Zinc-Plated Steel
- Hot-Dipped Galvanized steel
- 316 Stainless Steel
- 304 Stainless Steel
- Domestically Produced
Eye Bolt w/Shoulder No Thread (Blank)
Offered In
- Plain Self-Colored Steel
- Alloy Steel 4140
- Alloy Steel 8620
- 316 Stainless Steel
- 304 Stainless Steel
- Domestically Produced
Shoulder Eyebolt Rated Capacities
Size | Vertical 0º Lbs. | 45º Lbs. |
---|---|---|
1/4 | 500 | 125 |
5/16 | 900 | 225 |
3/8 | 1,300 | 325 |
7/16 | 1,800 | 450 |
1/2 | 2,400 | 600 |
9/16 | 3,000 | 800 |
5/8 | 4,000 | 1,000 |
3/4 | 5,000 | 1,250 |
7/8 | 7,000 | 1,750 |
1 | 9,000 | 2,250 |
1-1/8 | 12,000 | 3,000 |
1-1/4 | 15,000 | 3,750 |
1-1/2 | 21,000 | 5,250 |
1-3/4 | 28,000 | 7,000 |
2 | 38,000 | 9,500 |
2-1/2 | 56,000 | 14,000 |
NOTE: Plain Eyebolt angular rated capacities are significantly lower than Shoulder Eyebolt rated capacities; therefore, angular lifting is not recommended.
Eyebolt Rated Capacity Guidelines
- Eyebolts are designed with a 5:1 Safety Factor.
- The minimum threaded shank length of Eyebolts must be one thread diameter to attain the rated capacity.
- Regardless of the 5:1 Safety Factor, no greater load should be applied to an Eyebolt than the Rated Capacity listed.
- Angular lifts significantly reduce Shoulder Eyebolt Rated Capacities. Shoulder Eyebolts should not be used for angular lifts greater than 45º;
-
Sku #: 59A-M30-A
M30-A: M30 x 3.50 x 60.0mm Long Full Thread Shoulder Pattern Eyebolt Carbon Steel Self-Colored - Made in the USASpecial Price $68.58 Regular Price $94.41